How You Can Detect Your Heating System’s Warning Signs

Potential warning signs from your heating system can be more than just a chilly feeling on a cold morning. The heating system in your home can be complex, combining system components, vents, fans, ductwork, and thermostats—any of which may be an issue that impacts proper heating and consistent indoor temperatures. These problems may also show up in the form of higher monthly heating bills.

Staying alert to warning signs about issues with your heating system helps you bring the problem to the attention of a qualified HVAC technician promptly, before the issue becomes a major malfunction and/or a safety issue. Keep reading to learn about some warning signs to look out for.

• System blowing cold air. First, for a gas system make sure your thermostat is in the “On” position and set to “Heat”. Also, make sure that other gas appliances such as a gas stove, starts normally to confirm that gas is flowing to the house. If the furnace has a traditional pilot light, check to see if the flame is lit. If you have a heat pump, check your thermostat settings to ensure it is set to “Auto”. Beyond these checks, a heating professional is required for further diagnosis and repair.
• Warm airflow through vents is weak. The HVAC system’s air filter may be clogged. Many do-it-yourselfers can visibly check the condition of the air filter and replace it with a clean filter if necessary. Other potential problems, however, range from a defective furnace fan to ductwork issues, and these malfunctions must be handled by an experienced HVAC technician.
• The pilot flame appears yellow. A healthy pilot light should be a bright, steady blue. If it appears yellow and/or wavering, it could be lacking adequate oxygen for complete combustion. A faulty pilot flame can be a safety issue, and it may also prevent the gas furnace burner from igniting.
• Rapid cycling. If the furnace cycles on and off rapidly and repeatedly, this is not normal. Short heating cycles can be the result of an overheating furnace, a system that is too large for the house, or thermostat issues. Rapid cycling in a heat pump can also be caused by a refrigerant leak, contact your HVAC professional for a proper diagnosis and solution.

If you’re noticing warning signs of furnace malfunctions, call Jackson & Sons for the prompt service of a qualified technician.