Se Habla EspaƱol Our Services Call Now Request Service

New Bern, NC Plumbing & HVAC Services

Trusted Heating, Cooling, and Plumbing Solutions for New Bern Homeowners

Since 1974, Jackson & Sons has been the trusted name for heating and air conditioning in New Bern. From fast AC repairs to full system replacements, our experienced technicians deliver high-quality solutions with a personal, family-oriented approach.

We are proud to expand our services to include full residential plumbing. Whether you are dealing with a leaking pipe, a clogged drain, or need a new water heater installed, you can now rely on the same team that New Bern homeowners trust for HVAC.

Our goal is simple: to provide fast, reliable service that keeps your home comfortable and functioning year-round.

If you are looking for reliable HVAC or plumbing solutions in Craven County, we are just a call (980) 223-0791 or click away.

New Bern Nc

Keep Cool All Summer with Expert AC Services

Our air conditioning services are designed to keep your home comfortable through New Bern’s hot and humid summers. Whether your system needs a quick fix or a full replacement, we have the tools and training to get it done right.

AC Repair When You Need It Most

Energy-Efficient AC Installation

Stay Warm and Worry-Free with Reliable Heating Solutions

When temperatures drop, you need a heating system that works reliably. We provide repair, replacement, and maintenance services for furnaces and heat pumps to keep your home warm and energy-efficient through the winter.

Furnace and Heat Pump Repairs

New Heating System Installation

HVAC Maintenance

Restore Airflow and Efficiency with Ductwork Services

Professional Duct Repairs
Damaged or leaking ductwork can lead to hot and cold spots, reduced airflow, and increased energy bills. Our team identifies problem areas using pressure testing and thermal imaging, then seals, insulates, or repairs duct sections to restore performance and indoor comfort.

Complete Duct Replacement
If your ducts are undersized, poorly installed, or beyond repair, we can design and install a new duct system that supports your HVAC equipment and improves air distribution throughout your home. We follow best practices for airflow balance and energy efficiency.

Plumbing Solutions That Get the Job Done Right in New Bern

We bring the same level of professionalism and care to our plumbing services as we do to HVAC. Whether it is a small leak or a major backup, our licensed plumbers are ready with fast, effective solutions for your New Bern home.

Fix What’s Leaking with Dependable Plumbing Repairs

Leaky fixtures and damaged pipes can waste water and drive up your utility bill. We handle a wide range of plumbing issues with solutions that last.

Clear the Way with Drain and Sewer Services

Clogged drains can lead to water damage, foul odors, and recurring plumbing problems. Our team uses professional-grade equipment to clear and restore flow.

Count on Us for Hot Water Help

A dependable water heater is essential to your daily routine. When hot water runs out or your system shows signs of trouble, we are here to restore comfort.

Fixture Replacements For Your Home

Outdated or corroded fixtures not only affect function, they can impact your water usage and home’s appearance. We help modernize and improve performance.

Emergency Plumbing When You Need It Now

Plumbing emergencies can’t wait. Whether your home is flooding from a burst pipe or your sewer line has backed up, our team responds quickly to protect your home and restore service during our business hours.

Why New Bern Homeowners Choose Jackson & Sons

Jackson & Sons has been a trusted name in heating and cooling for New Bern homeowners since 1974. For over 50 years, we’ve delivered expert HVAC repairs, replacements, and maintenance with the kind of care only a family-oriented company can offer.Ā 

Now, we’re proud to bring that same level of professionalism and reliability to your plumbing system. While plumbing is a newer service for us, it’s backed by the same values, training, and customer-first mindset that have made our HVAC team one of the highest rated in Eastern North Carolina.

When you choose Jackson & Sons, you can expect:

When you need us, we’ll be there — with reliable service you can count on.

Call (980) 223-0791 or contact us online to schedule HVAC or plumbing service in New Bern today. We look forward to earning your trust and making your home more comfortable.

Recent Jobs and Reviews in New Bern, NC

Rated 4.9 out of 5 stars based on 206 customer reviews

Customers say: The reviews exhibit a positive overall sentiment, with a significant number of reviews expressing satisfaction and praise for the services provided by Jackson and Sons. The positive reviews highlight aspects such as excellent service, polite and informative technicians, quality installations, and friendly and helpful office staff. The recurring themes in the positive reviews include professionalism, punctuality, and the ability to address customer concerns effectively. However, there are also a few negative reviews, which primarily focus on issues such as delayed response times, scheduling conflicts, and dissatisfaction with the quality of work. The negative reviews mention specific instances where customers experienced problems or were not completely satisfied with the services provided. Overall, the sentiment of the reviews is positive, with a slight inclination towards the positive side. The recurring themes in the positive reviews indicate that Jackson and Sons generally provides high-quality services and strives to meet customer expectations. However, it is important to note that the negative reviews should not be overlooked, and the company should continue to work towards improving its services and addressing any issues that may arise.

New Bern, NC at a glance

Jackson & Sons has completed 25 jobs in New Bern, NC in December 2024.

The most recent job was on December 31, 2024.

Jackson & Sons completed its first job in New Bern, NC in September 2016.

Job Locations and Reviews

Spencer C.
Spencer C. Checked in
Tech found a blown low voltage fuse due to a shorted contactor. Tech replaced contactor and verified heat and AC working properly.
New Bern, NC 28562
Chris M.
Chris M. Checked in
Came to quote a 50 gallon electric water heater. Tall height.
New Bern, NC 28562
Kyle W.
Kyle W. Checked in
Performed ESA on (1) Carrier Split Heat Pump. Did not have 14x25x1 filter sizes on hand. Customer changes filters.
New Bern, NC 28560
Landon C.
Landon C. Checked in
Tech returned to fix challenges with Aprilaire filters on both systems. Tech corrected the challenges and filters are installed in systems.
New Bern, NC 28560
Landon C.
Landon C. Checked in
Tech preformed preventative maintenance and serviced system. Tech recommended a plasma air to enhance indoor air quality and provide allergy relief. Customer did not invest at this time. System is up and running with a delta t of 24.
New Bern, NC 28562
Landon C.
Landon C. Checked in
Tech preformed preventative maintenance and serviced system. Upon arrival, customer stated that one system had been making a louder noise at random times. Tech inspected both systems and allowed both systems to run and found no challenges. Both systems are up and running with a delta t of 23 and 22.
New Bern, NC 28562
Landon C.
Landon C. Checked in
Tech preformed preventative maintenance and serviced system. Tech found UV Bulb to be blown and recommended replacing. Customer invested in replacement UV bulb. System is up and running with a delta t of 30.
New Bern, NC 28562
Romario T.
Romario T. Checked in
Prior to replace the thermostat. Tech Found a short and replaced the fuse. Homeowners’s thermostat came on. Tech checked the refrigerant levels on the heat pump and found it slightly low on charge. Tech provided options to the customer and only approved locating/repairing the short and 1lb of R410a refrigerant. Home has a dual fuel split system and currently does not have gas. Customer is aware and will be planning on getting gas soon. Tech did informed that the back u heat will not operate until gas is supplied. Heat pump will only keep up on mild days. Tech did not have access back inside the home to adjust the thermostat set point and to adjust the thermostat wire that was hanging that customer requested to move. Tenants did not open.
New Bern, NC 28560
Ricardo T.
Ricardo T. Checked in
Tech washed and serviced unit and found no challenges at this time. Customer uses their own filters.
New Bern, NC 28562
Ricardo T.
Ricardo T. Checked in
Tech washed and serviced unit and found no challenges at this time. Customer would like to have their hot water heater checked out good any day preferably afternoon.
New Bern, NC 28562
Ricardo T.
Ricardo T. Checked in
Tech washed and serviced unit and found no challenges at this time. Customer uses their own filters.
New Bern, NC 28562
Norman A.
Norman A. Checked in
Install new water heater 240 volts 40 gallon water heater leak at top and bottom
New Bern, NC 28562
Ricardo T.
Ricardo T. Checked in
Tech washed and serviced unit and found no challenges at this time.
New Bern, NC 28560
Ricardo T.
Ricardo T. Checked in
Tech washed and serviced unit and found no challenges at this time.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Tech found thermostat energizing W when in cool mode, bringing the heat strips on. Advised customer that the thermostat needs to be replaced; customer opted to replace it on their own. Disconnected W from the low voltage circuit per customer request. Advised customer that the defrost sequence will not operate normally without the heat strips. Confirmed reversing valve operation and normal heat operation. No charge due to recent visit.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Tech found thermostat energizing W when in cool mode, bringing the heat strips on. Advised customer that the thermostat needs to be replaced; customer opted to replace it on their own. Disconnected W from the low voltage circuit per customer request. Advised customer that the defrost sequence will not operate normally without the heat strips. Confirmed reversing valve operation and normal heat operation. No charge due to recent visit.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Tech found thermostat energizing W when in cool mode, bringing the heat strips on. Advised customer that the thermostat needs to be replaced; customer opted to replace it on their own. Disconnected W from the low voltage circuit per customer request. Advised customer that the defrost sequence will not operate normally without the heat strips. Confirmed reversing valve operation and normal heat operation. No charge due to recent visit.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Tech found thermostat energizing W when in cool mode, bringing the heat strips on. Advised customer that the thermostat needs to be replaced; customer opted to replace it on their own. Disconnected W from the low voltage circuit per customer request. Advised customer that the defrost sequence will not operate normally without the heat strips. Confirmed reversing valve operation and normal heat operation. No charge due to recent visit.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Tech found gas valve receiving 24 volts but not allowing any gas through. Could not access inlet gas pressure on the valve due to the gas pressure sensor installed on the inlet port. Could not locate the propane gas tank; disconnected the gas line at the union and confirmed gas exiting the pipeline. Ignition control board is only sending 4.7 volts when calling for second stage and not opening the gas valve. When calling for first stage, gas valve intermittently opens and closes, indicating a failed solenoid internally. Tech replaced gas valve with a 2 stage valve and reconfigured the wiring to accommodate the change in wire connections. Tech removed the gas pressure sensor from the circuit and left parts in the electrical compartment. Observed low inlet pressure upon startup reading 6 inches of water column and steadily decreasing during operation. Customer discovered where the propane tank was located underground; tech observed that the tank is empty. Advised customer to refill it a
New Bern, NC 28560
Aidan T.
Aidan T. Checked in
- Tech found gas valve receiving 24 volts but not allowing any gas through. Could not access inlet gas pressure on the valve due to the gas pressure sensor installed on the inlet port. Could not locate the propane gas tank; disconnected the gas line at the union and confirmed gas exiting the pipeline. Ignition control board is only sending 4.7 volts when calling for second stage and not opening the gas valve. When calling for first stage, gas valve intermittently opens and closes, indicating a failed solenoid internally. Tech replaced gas valve with a 2 stage valve and reconfigured the wiring to accommodate the change in wire connections. Tech removed the gas pressure sensor from the circuit and left parts in the electrical compartment. Observed low inlet pressure upon startup reading 6 inches of water column and steadily decreasing during operation. Customer discovered where the propane tank was located underground; tech observed that the tank is empty. Advised customer to refill it a
New Bern, NC 28560
Aidan T.
Aidan T. Checked in
- Tech found gas valve receiving 24 volts but not allowing any gas through. Could not access inlet gas pressure on the valve due to the gas pressure sensor installed on the inlet port. Could not locate the propane gas tank; disconnected the gas line at the union and confirmed gas exiting the pipeline. Ignition control board is only sending 4.7 volts when calling for second stage and not opening the gas valve. When calling for first stage, gas valve intermittently opens and closes, indicating a failed solenoid internally. Tech replaced gas valve with a 2 stage valve and reconfigured the wiring to accommodate the change in wire connections. Tech removed the gas pressure sensor from the circuit and left parts in the electrical compartment. Observed low inlet pressure upon startup reading 6 inches of water column and steadily decreasing during operation. Customer discovered where the propane tank was located underground; tech observed that the tank is empty. Advised customer to refill it a
New Bern, NC 28560
Aidan T.
Aidan T. Checked in
- Tech found gas valve receiving 24 volts but not allowing any gas through. Could not access inlet gas pressure on the valve due to the gas pressure sensor installed on the inlet port. Could not locate the propane gas tank; disconnected the gas line at the union and confirmed gas exiting the pipeline. Ignition control board is only sending 4.7 volts when calling for second stage and not opening the gas valve. When calling for first stage, gas valve intermittently opens and closes, indicating a failed solenoid internally. Tech replaced gas valve with a 2 stage valve and reconfigured the wiring to accommodate the change in wire connections. Tech removed the gas pressure sensor from the circuit and left parts in the electrical compartment. Observed low inlet pressure upon startup reading 6 inches of water column and steadily decreasing during operation. Customer discovered where the propane tank was located underground; tech observed that the tank is empty. Advised customer to refill it a
New Bern, NC 28560
Jerry H.
Jerry H. Checked in
Returned and removed duct detector for unit 2. Inspector wanted it removed since it is not needed. Need to send pics to inspector.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Customer informed tech that the system was running in cool mode but still producing heat. - Tech found Google Nest thermostat not energizing the O terminal when in cool mode, causing the system to run in heat mode. Advised customer and provided estimate. Customer will replace the thermostat on their own. - Tech recommended a service agreement; customer declined at this time. - Tech re-secured panel insulation, tested electric heat strips and confirmed defrost operation. System is heating normally at this time.
New Bern, NC 28562
Aidan T.
Aidan T. Checked in
- Customer informed tech that the system was running in cool mode but still producing heat. - Tech found Google Nest thermostat not energizing the O terminal when in cool mode, causing the system to run in heat mode. Advised customer and provided estimate. Customer will replace the thermostat on their own. - Tech recommended a service agreement; customer declined at this time. - Tech re-secured panel insulation, tested electric heat strips and confirmed defrost operation. System is heating normally at this time.
New Bern, NC 28562
Request Service
servicedetailscustomerreturningschedule
Details Regarding Your Request...
Optional: Drag and drop photos and/or videos:
Max. file size: 4 MB.
Your Contact and Service Location...
*
*
To Serve You Best...
Have we served you in the past?
Yes
No
What Is Convenient For You?
What time of day is best for you?
First Available
Morning
Afternoon

Call For Same Day Service/Emergencies at (980) 223-0791 .

By pressing Submit I agree to receive phone, email, or text messages from Jackson & Sons to the provided mobile number and also agree to the Jackson & Sons terms and privacy policy. Message & data rates may apply. Consent is not a condition of purchase. We will never share your personal information with third parties for marketing purposes.
Back Next