Roseboro NC Heating Air & Conditioning Services
Jackson and Sons has been serving the heating and air conditioning needs of Roseboro, NC residents and businesses since 1974.
Our reviews below from your neighbors in Roseboro, NC tell the story of our quality, dedication and commitment to customer service.
Local Reviews
for Roseboro, NC
Customers say: The reviews exhibit a positive overall sentiment, with a significant number of reviews expressing satisfaction and praise for the services provided by Jackson and Sons. The positive reviews highlight aspects such as excellent service, polite and informative technicians, quality installations, and friendly and helpful office staff. The recurring themes in the positive reviews include professionalism, punctuality, and the ability to address customer concerns effectively. However, there are also a few negative reviews, which primarily focus on issues such as delayed response times, scheduling conflicts, and dissatisfaction with the quality of work. The negative reviews mention specific instances where customers experienced problems or were not completely satisfied with the services provided. Overall, the sentiment of the reviews is positive, with a slight inclination towards the positive side. The recurring themes in the positive reviews indicate that Jackson and Sons generally provides high-quality services and strives to meet customer expectations. However, it is important to note that the negative reviews should not be overlooked, and the company should continue to work towards improving its services and addressing any issues that may arise.
Our Reviews by City
Great Service
Alvin - Roseboro, NC 28382
Great Service
RUBELMANN - Roseboro, NC 28382
Great Service
JASON - Roseboro, NC 28382
Technician was knowledgeable and courteous.
Response from Jackson & Sons:
Your kind words mean a lot to us. Thanks for the positive feedback.
Very Courteous
JASON - Roseboro, NC 28382
Great service person
Ralph - Roseboro, NC 28382
Great
In and out, no hassle.
Jason - Roseboro, NC 28382
Alex R.
Found toilet running. Rebuilt toilet with new fill valve and flapper.
Logan P.
Returned to fix deck board. Replaced and installed new 2x6x8 treated deck board. All ok at this time. Customer stated it was not cooling as well as last visit. Tech checked delta t. Temperature is within specification. Customer is aware and satisfied. Found no other challenges at todays visit.
Logan P.
Tech performed service on coleman split furnace. As tech walked in house customer stated drain pan was filling with water. Luis was at last visit for clogged drain line and said the pan needed to be leveled. Stated to homeowner about situation and agreed to level out drain pan. Tech leveled out drain pan and showed customer that pan is level. All ok at this time. As tech was walking down wooded deck, the bottom wood step snapped. Customer is aware of situation and would like for it to be replaced. Found no other challenges at todays visit.
Luis R.
Technician found drain pan was slightly un level causing it to not drain properly customer stated they ensured the drain is cleared.tech informed them on finding of slope of drain pan. Technician quoted out minor repair to put shims under drain pan. Customer stated they will put a shim. Maintenance is due in a few days.
Wes B.
Performed CMA Full Service on 4 split systems #1 - Lobby - technician did not find any challenges while servicing this system today. The system is cooling properly and holding a delta t of 20 degrees. #2 - Dining - no issues were present with this system today. The unit is cooling good with a 19 degree delta t. #3 - Kitchen - technician found the system to be cooling properly with a 20 degree delta t. No challenges present at this time. #4 - Laundry/Back Hall - upon arriving to the system the technician found the delta t to be about 13 degrees. Upon inspection of the air handler, the technician found water sitting under blower inside the unit, however, the drain pan was clear. This appears to be a previous over flow that was cleared and the remaining water was not removed. Tech removed what water they could from the system. When arriving to outside unit, the technician found the coil impacted with lent, grass and debris. The old dryer vent use to not curve away and was dumping lent
Romario T.
Found the system with burnt wires, blower relay smoked/failed, abnormal low voltage wiring (2 transformers wire in together on the low voltage side) and thermostat wire cut off due to recent floor work performed. Tech received approval from the homeowner to perform todays repairs.tech ran thermostat wire from the thermostat base to the furnace, corrected the wiring and replaced all the burnt high voltage terminals at the furnace. Costumer also invested into MPA (monthly premium agreement). Tech tested the system afterwards in cool and system operated without challenges. Mercury thermostat is encouraged to be replaced/upgraded. Tech also found 2 10inch crossover ducts (one measures 15-20 feet and the mother one measured 25 feet) in bad conditions. Costumer is aware and will consider to replace them when they are ready to replace the whole hvac system. Outdoor unit capacitor is rusted but was reading good(within specs). System is back cooling but will lack of airflow.
Romario T.
Tech recheck and did verified the previous tech diagnostics of a shorted indoor blower motor. Costumer approved replacing the 1/2hp indoor blower motor. Office discounted the capacitor price that was replaced recently. Tested cooling after the blower motor replacement. System is back cooling. Delta T of 18 degrees. Amp draw with the door on is within spec. Relay and sequencer need to be on watch.
Kenny C.
Upon arrival tech found system in the off position, tech then ran system from thermostat and found blower not running and then made a “pop” noise. Tech took out blower and made sure no live wires were touching and made the conclusion that blower motor had failed. Tech explained to homeowner blower motor had been probably running poorly before capacitor change out causing motor to over amp and windings to go out. Tech could not see or locate data tag on blower to get the correct rpm’s and horse power. Office will need to look up what type of motor will need to be replaced. Homeowner stated to just leave blower motor out for right now. No charge for tonight’s visit due to recent repair/premium customer. System is currently down at the moment until we replace blower motor.
Kyle W.
FOUND FAILED BLOWER CAPACITOR. REPLACED CAPACITOR AND CYCLED WITH NO CHALLENGES. INVESTED IN MPA (1) SYSTEM.
Landen H.
Performed routine maintenance per energy savings agreement. Technician did not find any challenges at todays visit. The system is heating properly and holding a delta t of 20+ degrees. One recommendation the tech had is to replace the contactor in the system. The one currently in the system is showing signs of pitting. This is a sign of potential future failure. Tech recommends replacing to avoid system downtime and a future service call. Estimate built and added to system for customer review