New Bern, NC Plumbing & HVAC Services
Trusted Heating, Cooling, and Plumbing Solutions for New Bern Homeowners
Since 1974, Jackson & Sons has been the trusted name for heating and air conditioning in New Bern. From fast AC repairs to full system replacements, our experienced technicians deliver high-quality solutions with a personal, family-oriented approach.
We are proud to expand our services to include full residential plumbing. Whether you are dealing with a leaking pipe, a clogged drain, or need a new water heater installed, you can now rely on the same team that New Bern homeowners trust for HVAC.
Our goal is simple: to provide fast, reliable service that keeps your home comfortable and functioning year-round.
If you are looking for reliable HVAC or plumbing solutions in Craven County, we are just a call (980) 223-0791 or click away.

Keep Cool All Summer with Expert AC Services
Our air conditioning services are designed to keep your home comfortable through New Bernās hot and humid summers. Whether your system needs a quick fix or a full replacement, we have the tools and training to get it done right.
AC Repair When You Need It Most
- Diagnose and fix warm air, short cycling, or poor airflow
- Address electrical or refrigerant issues causing system failure
- Service all major brands with fully stocked trucks for faster repairs
Energy-Efficient AC Installation
- Evaluate your home size, layout, and comfort needs
- Install energy-efficient central AC systems or heat pumps
- Properly size and balance airflow for long-term system performance
Stay Warm and Worry-Free with Reliable Heating Solutions
When temperatures drop, you need a heating system that works reliably. We provide repair, replacement, and maintenance services for furnaces and heat pumps to keep your home warm and energy-efficient through the winter.
Furnace and Heat Pump Repairs
- Troubleshoot uneven heating, pilot light issues, or strange noises
- Repair heat pumps, gas furnaces, and hybrid systems
- Restore consistent comfort and safe operation
New Heating System Installation
- Remove outdated or undersized systems
- Install high-efficiency furnaces and dual-fuel systems
- Help you select the right system for your home and energy goals
HVAC Maintenance
- Replace Filter / Clean If Permanent
- Disassemble Unit
- Clean Evaporator and Condenser Coils
- Remove All Leaves and Debris
- Tighten All Electrical Connections
- Measure Amp Draws on compressor, Motors and Heat Strips
- Inspect Outdoor Fan Blade
- Clean and Adjust Blower Wheel if Needed
- Clean and Inspect Flow of Condensate Drain
- Inspect and Test Defrost Cycle
- Inspect Crank Case Heater
- Test Capacitors
- Reassemble Unit, Replace Any Missing or Rusted Screws
- Wash Unit and Apply Protective Coating
- Monitor and Record Delta T
- Inspect Duct System
- Monitor Air Flow
- Inspect Thermostat and Reset to Customer Desire Settings
- Cycle System to Ensure Proper Operation
Restore Airflow and Efficiency with Ductwork Services
Professional Duct Repairs
Damaged or leaking ductwork can lead to hot and cold spots, reduced airflow, and increased energy bills. Our team identifies problem areas using pressure testing and thermal imaging, then seals, insulates, or repairs duct sections to restore performance and indoor comfort.
Complete Duct Replacement
If your ducts are undersized, poorly installed, or beyond repair, we can design and install a new duct system that supports your HVAC equipment and improves air distribution throughout your home. We follow best practices for airflow balance and energy efficiency.
Plumbing Solutions That Get the Job Done Right in New Bern
We bring the same level of professionalism and care to our plumbing services as we do to HVAC. Whether it is a small leak or a major backup, our licensed plumbers are ready with fast, effective solutions for your New Bern home.
Fix Whatās Leaking with Dependable Plumbing Repairs
Leaky fixtures and damaged pipes can waste water and drive up your utility bill. We handle a wide range of plumbing issues with solutions that last.
- Fix leaking faucets, running toilets, and burst pipes
- Repair water pressure issues and faulty shut-off valves
- Provide fast diagnosis and long-lasting repair options
Clear the Way with Drain and Sewer Services
Clogged drains can lead to water damage, foul odors, and recurring plumbing problems. Our team uses professional-grade equipment to clear and restore flow.
- Clear clogs in kitchen sinks, bathtubs, showers, and toilets
- Remove buildup, grease, and debris from interior and exterior lines
- Prevent backups and recurring drain problems with professional tools
Count on Us for Hot Water Help
A dependable water heater is essential to your daily routine. When hot water runs out or your system shows signs of trouble, we are here to restore comfort.
- Diagnose no hot water, rust-colored water, or strange noises
- Repair or replace tank and tankless water heater systems
- Install high-efficiency models sized for your householdās usage
Fixture Replacements For Your Home
Outdated or corroded fixtures not only affect function, they can impact your water usage and homeās appearance. We help modernize and improve performance.
- Upgrade faucets, toilets, and showerheads for better performance
- Replace corroded or leaking plumbing connections
- Improve water efficiency and refresh your homeās appearance
Emergency Plumbing When You Need It Now
Plumbing emergencies canāt wait. Whether your home is flooding from a burst pipe or your sewer line has backed up, our team responds quickly to protect your home and restore service during our business hours.
- Immediate help for pipe bursts, severe leaks, or flooding
- Fast response to water heater failure or sewer backups
- Restore safety and prevent further water damage
Why New Bern Homeowners Choose Jackson & Sons
Jackson & Sons has been a trusted name in heating and cooling for New Bern homeowners since 1974. For over 50 years, weāve delivered expert HVAC repairs, replacements, and maintenance with the kind of care only a family-oriented company can offer.Ā
Now, weāre proud to bring that same level of professionalism and reliability to your plumbing system. While plumbing is a newer service for us, itās backed by the same values, training, and customer-first mindset that have made our HVAC team one of the highest rated in Eastern North Carolina.
When you choose Jackson & Sons, you can expect:
- Licensed, background-checked HVAC and plumbing professionals
- Fast, responsive service with same-day availability whenever possible
- Honest pricing and clear communication
- Thousands of 5-star reviews from satisfied customers
- A team that truly cares about the comfort and safety of your home
When you need us, weāll be there ā with reliable service you can count on.
Call (980) 223-0791 or contact us online to schedule HVAC or plumbing service in New Bern today. We look forward to earning your trust and making your home more comfortable.
Recent Jobs and Reviews in New Bern, NC
New Bern, NC at a glance
Jackson & Sons has completed 25 jobs in New Bern, NC between November 2024 and December 2024.
The most recent job was on December 2, 2024.
Jackson & Sons completed its first job in New Bern, NC in September 2016.
Our Local Reviews by City
- Albertson, NC (17)
- Ayden, NC (26)
- Bailey, NC (9)
- Benson, NC (14)
- Beulaville, NC (21)
- Black Creek, NC (3)
- Brogden, NC (163)
- Calypso, NC (5)
- Chinquapin, NC (3)
- Clayton, NC (170)
- Clinton, NC (80)
- Cove City, NC (4)
- Deep Run, NC (32)
- Dover, NC (2)
- Dudley, NC (121)
- Dunn, NC (16)
- Elm City, NC (5)
- Erwin, NC (1)
- Faison, NC (40)
- Farmville, NC (30)
- Four Oaks, NC (69)
- Fremont, NC (148)
- Garner, NC (15)
- Goldsboro, NC (4285)
- Grantham, NC (2)
- Greenville, NC (175)
- Grifton, NC (14)
- Hookerton, NC (14)
- Jason, NC (1)
- Kenansville, NC (18)
- Kenly, NC (79)
- Kinston, NC (235)
- La Grange, NC (316)
- Lillington, NC (4)
- Lucama, NC (4)
- Magnolia, NC (4)
- Mar-Mac, NC (22)
- Micro, NC (2)
- Middlesex, NC (2)
- Mount Olive, NC (195)
- Nashville, NC (15)
- New Bern, NC (206)
- Newton Grove, NC (40)
- North Clinton, NC (1)
- Pikeville, NC (414)
- Pine Level, NC (5)
- Pink Hill, NC (27)
- Plain View, NC (1)
- Princeton, NC (156)
- Richlands, NC (3)
- Rocky Mount, NC (63)
- Rose Hill, NC (2)
- Roseboro, NC (6)
- Selma, NC (90)
- Seven Springs, NC (103)
- Sims, NC (2)
- Smithfield, NC (149)
- Snow Hill, NC (127)
- Stantonsburg, NC (30)
- Tarboro, NC (8)
- Teachey, NC (1)
- Turkey, NC (6)
- Vanceboro, NC (10)
- Wallace, NC (5)
- Walnut Creek, NC (45)
- Walstonburg, NC (9)
- Warsaw, NC (33)
- Wendell, NC (10)
- Willow Spring, NC (2)
- Wilson, NC (50)
- Wilson Mills, NC (1)
- Winterville, NC (94)
- Zebulon, NC (3)
Job Locations and Reviews
Upon arrival tech found upstairs thermostat going in and out due to all common wires loose at ignition control board. Also causing furnace to go out intermittently. Tech secured connections and let system run for 20 minutes without issue. Furnace operation only as previous diagnosis stated system is leaking and very low on refrigerant. No charge per office due to previous diagnosis as customer stated issue has been ongoing. System is back up and heating.
Upon arrival tech found condenser to be iced over tech found ambient temp sensor to have failed tech recommended repair system is under warranty customer approved replacement. Tech bypassed sensor and got unit to defrost on its own tech found no other challenges at todays visit unit is up heating at this time.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech found heat pump heat and auxiliary heat both not running. Tech found thermostat minimum compressor run temp setting at 35 causing thermostat to not send power to y. Tech lowered setting. Tech found thermostat W going to blue to the condenser then going to city of new Bern box and coming back on brown. Brown was not tied back to white. Tech required white circuit and found heat pump heat and auxiliary heat operating properly. Supply temp is now 109.
Tech washed and serviced unit and found dual run capacitor to be testing weak mate h recommend replacement customer approved turbo capacitor. Tech found no other challenges at this time unit is up heating and cooling properly at this time
Tech washed and serviced unit and found no challenges at this time customer extended psa monthly. Unit is up heating and cooling properly at this time.
Tech washed and serviced both units and found upstairs capacitor to be testing weak tech recommended customer was not interested at this time tech also found drain pains to be rusted tech informed customer customer was already aware. Customer will not be renewing today due to selling the home and moving next month both units are up and heating at this time.
Upon arrival tech found thermostat stuck on 74 degree indoor temperature, tech reset sensor and system is now operating properly, tech allowed system to run for 20 minutes to ensure sensor is operating properly. Spoke with customer and if this issue continues then we will need to replace thermostat. Warranty
Customer state when it rain water stands in back yard all way to back slide door Ran water in drain not leak advise home owner to get a landscaper to get drain right in back yard.were water isnāt standing near house
Install customer supply material to fix broke Handel on shower
Sold
Tech performed service on trane package unit. As tech was servicing unit, found evaporator coil to be dirty and have bacterial growth. Recommend installation of Uv Light kit. Customer is interested but declined at todays visit. Tech also recommended installation of plasma air purifier. Installed after customers approval. Recommend as well a 20x30x3 media filter. Installed after customers approval. Customer stated would like tech to come for all future services. Delta t is within specification and customer is satisfied with todays visit. Found no other challenges at todays visit.
Removed the cover and ran a snake through the drain. Removed a type of cloth from the drain. Tested the drain after snaking it and is working properly.
- Tech found plug-in disconnect not making proper contact due to misshapen plastic faceplate. Re-spliced high voltage connections and replaced wire nuts after observing loose connection. Removed faceplate and re-secured plug-in. Confirmed no tripped breakers and proper breaker sizes. - Total system amp draw is reading 41.9 with heat strips. System is operating normally at this time with heat delta T measuring 36°F. No charge due to recent maintenance.
- Tech found plug-in disconnect not making proper contact due to misshapen plastic faceplate. Re-spliced high voltage connections and replaced wire nuts after observing loose connection. Removed faceplate and re-secured plug-in. Confirmed no tripped breakers and proper breaker sizes. - Total system amp draw is reading 41.9 with heat strips. System is operating normally at this time with heat delta T measuring 36°F. No charge due to recent maintenance.
- Tech found plug-in disconnect not making proper contact due to misshapen plastic faceplate. Re-spliced high voltage connections and replaced wire nuts after observing loose connection. Removed faceplate and re-secured plug-in. Confirmed no tripped breakers and proper breaker sizes. - Total system amp draw is reading 41.9 with heat strips. System is operating normally at this time with heat delta T measuring 36°F. No charge due to recent maintenance.
- Tech found plug-in disconnect not making proper contact due to misshapen plastic faceplate. Re-spliced high voltage connections and replaced wire nuts after observing loose connection. Removed faceplate and re-secured plug-in. Confirmed no tripped breakers and proper breaker sizes. - Total system amp draw is reading 41.9 with heat strips. System is operating normally at this time with heat delta T measuring 36°F. No charge due to recent maintenance.
Installed a new RHEEM tankless heater in the garage.

