New Bern, NC Plumbing & HVAC Services
Trusted Heating, Cooling, and Plumbing Solutions for New Bern Homeowners
Since 1974, Jackson & Sons has been the trusted name for heating and air conditioning in New Bern. From fast AC repairs to full system replacements, our experienced technicians deliver high-quality solutions with a personal, family-oriented approach.
We are proud to expand our services to include full residential plumbing. Whether you are dealing with a leaking pipe, a clogged drain, or need a new water heater installed, you can now rely on the same team that New Bern homeowners trust for HVAC.
Our goal is simple: to provide fast, reliable service that keeps your home comfortable and functioning year-round.
If you are looking for reliable HVAC or plumbing solutions in Craven County, we are just a call (980) 223-0791 or click away.

Keep Cool All Summer with Expert AC Services
Our air conditioning services are designed to keep your home comfortable through New Bernās hot and humid summers. Whether your system needs a quick fix or a full replacement, we have the tools and training to get it done right.
AC Repair When You Need It Most
- Diagnose and fix warm air, short cycling, or poor airflow
- Address electrical or refrigerant issues causing system failure
- Service all major brands with fully stocked trucks for faster repairs
Energy-Efficient AC Installation
- Evaluate your home size, layout, and comfort needs
- Install energy-efficient central AC systems or heat pumps
- Properly size and balance airflow for long-term system performance
Stay Warm and Worry-Free with Reliable Heating Solutions
When temperatures drop, you need a heating system that works reliably. We provide repair, replacement, and maintenance services for furnaces and heat pumps to keep your home warm and energy-efficient through the winter.
Furnace and Heat Pump Repairs
- Troubleshoot uneven heating, pilot light issues, or strange noises
- Repair heat pumps, gas furnaces, and hybrid systems
- Restore consistent comfort and safe operation
New Heating System Installation
- Remove outdated or undersized systems
- Install high-efficiency furnaces and dual-fuel systems
- Help you select the right system for your home and energy goals
HVAC Maintenance
- Replace Filter / Clean If Permanent
- Disassemble Unit
- Clean Evaporator and Condenser Coils
- Remove All Leaves and Debris
- Tighten All Electrical Connections
- Measure Amp Draws on compressor, Motors and Heat Strips
- Inspect Outdoor Fan Blade
- Clean and Adjust Blower Wheel if Needed
- Clean and Inspect Flow of Condensate Drain
- Inspect and Test Defrost Cycle
- Inspect Crank Case Heater
- Test Capacitors
- Reassemble Unit, Replace Any Missing or Rusted Screws
- Wash Unit and Apply Protective Coating
- Monitor and Record Delta T
- Inspect Duct System
- Monitor Air Flow
- Inspect Thermostat and Reset to Customer Desire Settings
- Cycle System to Ensure Proper Operation
Restore Airflow and Efficiency with Ductwork Services
Professional Duct Repairs
Damaged or leaking ductwork can lead to hot and cold spots, reduced airflow, and increased energy bills. Our team identifies problem areas using pressure testing and thermal imaging, then seals, insulates, or repairs duct sections to restore performance and indoor comfort.
Complete Duct Replacement
If your ducts are undersized, poorly installed, or beyond repair, we can design and install a new duct system that supports your HVAC equipment and improves air distribution throughout your home. We follow best practices for airflow balance and energy efficiency.
Plumbing Solutions That Get the Job Done Right in New Bern
We bring the same level of professionalism and care to our plumbing services as we do to HVAC. Whether it is a small leak or a major backup, our licensed plumbers are ready with fast, effective solutions for your New Bern home.
Fix Whatās Leaking with Dependable Plumbing Repairs
Leaky fixtures and damaged pipes can waste water and drive up your utility bill. We handle a wide range of plumbing issues with solutions that last.
- Fix leaking faucets, running toilets, and burst pipes
- Repair water pressure issues and faulty shut-off valves
- Provide fast diagnosis and long-lasting repair options
Clear the Way with Drain and Sewer Services
Clogged drains can lead to water damage, foul odors, and recurring plumbing problems. Our team uses professional-grade equipment to clear and restore flow.
- Clear clogs in kitchen sinks, bathtubs, showers, and toilets
- Remove buildup, grease, and debris from interior and exterior lines
- Prevent backups and recurring drain problems with professional tools
Count on Us for Hot Water Help
A dependable water heater is essential to your daily routine. When hot water runs out or your system shows signs of trouble, we are here to restore comfort.
- Diagnose no hot water, rust-colored water, or strange noises
- Repair or replace tank and tankless water heater systems
- Install high-efficiency models sized for your householdās usage
Fixture Replacements For Your Home
Outdated or corroded fixtures not only affect function, they can impact your water usage and homeās appearance. We help modernize and improve performance.
- Upgrade faucets, toilets, and showerheads for better performance
- Replace corroded or leaking plumbing connections
- Improve water efficiency and refresh your homeās appearance
Emergency Plumbing When You Need It Now
Plumbing emergencies canāt wait. Whether your home is flooding from a burst pipe or your sewer line has backed up, our team responds quickly to protect your home and restore service during our business hours.
- Immediate help for pipe bursts, severe leaks, or flooding
- Fast response to water heater failure or sewer backups
- Restore safety and prevent further water damage
Why New Bern Homeowners Choose Jackson & Sons
Jackson & Sons has been a trusted name in heating and cooling for New Bern homeowners since 1974. For over 50 years, weāve delivered expert HVAC repairs, replacements, and maintenance with the kind of care only a family-oriented company can offer.Ā
Now, weāre proud to bring that same level of professionalism and reliability to your plumbing system. While plumbing is a newer service for us, itās backed by the same values, training, and customer-first mindset that have made our HVAC team one of the highest rated in Eastern North Carolina.
When you choose Jackson & Sons, you can expect:
- Licensed, background-checked HVAC and plumbing professionals
- Fast, responsive service with same-day availability whenever possible
- Honest pricing and clear communication
- Thousands of 5-star reviews from satisfied customers
- A team that truly cares about the comfort and safety of your home
When you need us, weāll be there ā with reliable service you can count on.
Call (980) 223-0791 or contact us online to schedule HVAC or plumbing service in New Bern today. We look forward to earning your trust and making your home more comfortable.
Recent Jobs and Reviews in New Bern, NC
New Bern, NC at a glance
Jackson & Sons has completed 25 jobs in New Bern, NC in June 2024.
The most recent job was on June 17, 2024.
Jackson & Sons completed its first job in New Bern, NC in September 2016.
Our Local Reviews by City
- Albertson, NC (17)
- Ayden, NC (26)
- Bailey, NC (9)
- Benson, NC (14)
- Beulaville, NC (21)
- Black Creek, NC (3)
- Brogden, NC (163)
- Calypso, NC (5)
- Chinquapin, NC (3)
- Clayton, NC (170)
- Clinton, NC (80)
- Cove City, NC (4)
- Deep Run, NC (32)
- Dover, NC (2)
- Dudley, NC (121)
- Dunn, NC (16)
- Elm City, NC (5)
- Erwin, NC (1)
- Faison, NC (40)
- Farmville, NC (30)
- Four Oaks, NC (69)
- Fremont, NC (148)
- Garner, NC (15)
- Goldsboro, NC (4285)
- Grantham, NC (2)
- Greenville, NC (175)
- Grifton, NC (14)
- Hookerton, NC (14)
- Jason, NC (1)
- Kenansville, NC (18)
- Kenly, NC (79)
- Kinston, NC (235)
- La Grange, NC (316)
- Lillington, NC (4)
- Lucama, NC (4)
- Magnolia, NC (4)
- Mar-Mac, NC (22)
- Micro, NC (2)
- Middlesex, NC (2)
- Mount Olive, NC (195)
- Nashville, NC (15)
- New Bern, NC (206)
- Newton Grove, NC (40)
- North Clinton, NC (1)
- Pikeville, NC (414)
- Pine Level, NC (5)
- Pink Hill, NC (27)
- Plain View, NC (1)
- Princeton, NC (156)
- Richlands, NC (3)
- Rocky Mount, NC (63)
- Rose Hill, NC (2)
- Roseboro, NC (6)
- Selma, NC (90)
- Seven Springs, NC (103)
- Sims, NC (2)
- Smithfield, NC (149)
- Snow Hill, NC (127)
- Stantonsburg, NC (30)
- Tarboro, NC (8)
- Teachey, NC (1)
- Turkey, NC (6)
- Vanceboro, NC (10)
- Wallace, NC (5)
- Walnut Creek, NC (45)
- Walstonburg, NC (9)
- Warsaw, NC (33)
- Wendell, NC (10)
- Willow Spring, NC (2)
- Wilson, NC (50)
- Wilson Mills, NC (1)
- Winterville, NC (94)
- Zebulon, NC (3)
Job Locations and Reviews
Tech performed ESA, tech found no issues at todays visit, system is back on and operating properly at this time. Customer supplies their own filters. Customer renewed.
Tech performed ESA, tech found no issues at todays visit, system is back on and operating properly at this time. Customer supplies their own filters. Customer renewed.
Tech performed ESA, tech found no issues at todays visit, system is back on and operating properly at this time. Customer supplies their own filters. Customer renewed.
FOUND SUPPLY PLENUM INSULATION IN POOR CONDITION/TAPE UNDONE CAUSING PLENUM TO SWEAT ONTO ATTIC FLOOR. DRAINED EXCESS WATER AND PUT BUCKETS UNDERNEATH FOR TIME BEING. REPAIR AND MAINTENANCE IS SCHEDULED FOR FRIDAY BETWEEN 1-3PM. DO NOT RE-SCHEDULE UNLESS EARLIER IN THE WEEK.
FOUND 10 TON SYSTEM LOW ON CHARGE. LOCATED LEAK AT SUCTION LINE FITTING. BUILT ESTIMATE FOR REPAIR. WILL CALL IN IF APPROVED. SYSTEM REPLACEMENT RECOMMENDED DUE TO AGE/REPAIR COSTS.
TECH PERFORMED CMA FULL SERVICE ON 3 SPLIT SYSTEMS. ALL SYSTEMS ARE COOLING PROPERLY AND HAVE A PROPER DELTA T. AIR HANDLERS #2 and #3 WERE DOUBLE FILTERED, MEANING THERE WAS FILTERS INSIDE AIR HNDLER AND FILTERS INSIDE OF LAY IN FILTER GRILL. TECH REPLACED FILTERS INSIDE FILTER GRILL AND TOOK FILTERS OUT OF AIR HANDLERS TO ESURE PROPER AIR CIRCULATION. TECH WASHED CABNETS OF ALL 3 OUTSIDE CONDENSERS. PERFORMED AND COMPLETED FIKTER CHANGE OF 6-20x20x1 FILTERS AND 1-12x24x1 FILTER. THERE ARE PICTURES AND A PERFORMANCE REPORT ATTACHED TO THIS INVOICE.
FOUND SYSTEM FREEZING UP DUE TO LOW REFRIGERANT CHARGE. LOCATED LEAK WITHIN EVAPORATOR COIL. OFFICE RECORDS SHOW SYSTEM IS NOT UNDER ANY WARRANTIES, BUT CUSTOMER HAS DOCUMENTS STATING THEY ARE GOOD UNTIL DECEMBER. NEED TO CALL AND VERIFY WITH CUSTOMER BEFORE ORDERING COIL. INVESTED IN PSA (1) SYSTEM.
Installing a gas line for tankless water heater for customer.
.
Tech performed esa on carrier split heat pump, found no challenges at todays visit Customer extended esa
Tech performed ESA on 1 system. Tech serviced and cleaned system. Tech faced no challenges at todays visit and system is running properly at this time.
FOUND AUXILIARY PAN FULL OF WATER DUE TO PRIMARY DRAIN CONNECTIONS BEING INSTALLED ON HIGH END OF PRIMARY DRAIN PAN, CAUSING WATER TO OVERFLOW. CUT AND MOVED PRIMARY DRAIN LINE AND FLOAT SWITCH OVER TO LEFT PORTS TO LOW SIDE OF PAN. SYSTEM IS NOW DRAINING PROPERLY. INSTALL WARRANTY.
(MINI SPLIT SYSTEM) FOUND LOW ON CHARGE CAUSING SYSTEM TO FREEZE UP. LOCATED LEAK WITHIN AIR HANDLER FLARE FITTINGS. TIGHTENED FITTING AND CHARGED SYSTEM TO PROPER SPECS WITH NO FURTHER LEAKS PRESENT. SYSTEM UP AND COOLING. INVESTED IN PSA (2) SYSTEMS. CALL TO SCHEDULE 1ST VISIT AS SOON AS POSSIBLE. NOTICED SMALL AMOUNT OF WATER WITHIN AUXILIARY PAN OF MAIN SYSTEM. CUSTOMER STATED HE WILL TAKE CARE OF IT FOR NOW AND ADDRESS DURNG MAINTENANCE VISIT.
Tech performed esa on carrier package unit, found no challenges at todays visit Customer wasnāt home during maintenance Left filters on porch
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Tech found unit running in single stage and no power at Y2. Tech put thermostat in test mode and found still no power at y2. Tech tied y1 and y2 together at thermostat and still only found power at Y1. This indicates a broken brown wire. Tech connected y1 and y2 together at the board and found system now running second stage. Manager on site also requested we look at the other unit as well. Tech found compressor 2 contactor not pulling in due to LSD2 safety module breaking power to y. Tech bypassed switch for diagnostic purposes and found no issues with pressures or amp draw and recommends replacing the module. MOD02964
Three handles tub valve on hot side was leaking need the seat replaced in the mix valve
Tech found drain exit was too high, and coil is dirty causing water to drip straight down versus rolling down the coil. Tech recommends a maintenance plan to clean coil and clear drain. Tech explained that if cleaning the coil doesnāt work for a downflow coil, the coil will have to be replaced. Tech also verified suction pressure not causing a frozen coil. Unit did look slightly low based on subcooling with a TXV and tech quoted topping system off. Customer agreed to maintenance agreement and minor repair to lower drain exit point. Tech addressed evaporator coil today and documented water now rolling down the coil instead of falling straight down. Tech also documented water exiting the drain. Customer wants receipt mailed

